[Request] [++-- ] D10855: clone: reuse the stream clone logic for local clone
marmoute (Pierre-Yves David)
phabricator at mercurial-scm.org
Wed Jun 9 14:40:03 UTC 2021
marmoute created this revision.
Herald added a reviewer: hg-reviewers.
Herald added a subscriber: mercurial-patches.
REVISION SUMMARY
Streaming clone and local (non `--pull`) clone do mostly the same thing,
however they were using different logic to do so. This means the logic
frequently went out of sync and that new case had to be dealt with twice.
This is fragile and anoying. So we replace this with a re-use of the logic we
use for streaming clone.
I can see various test changes:
- a more precise progress output,
- armless fncache loading during clone,
- fncache is no longer hardlinked (since we write it by hand).
I am not reinstalling the `reposimplestore` specific output, as far as I
understand this variant have been broken for years.
REPOSITORY
rHG Mercurial
BRANCH
default
REVISION DETAIL
https://phab.mercurial-scm.org/D10855
AFFECTED FILES
mercurial/hg.py
mercurial/streamclone.py
tests/test-clone.t
tests/test-empty.t
tests/test-fncache.t
tests/test-hardlinks.t
tests/test-subrepo-deep-nested-change.t
tests/test-subrepo-recursion.t
CHANGE DETAILS
diff --git a/tests/test-subrepo-recursion.t b/tests/test-subrepo-recursion.t
--- a/tests/test-subrepo-recursion.t
+++ b/tests/test-subrepo-recursion.t
@@ -454,19 +454,15 @@
#if hardlink
$ hg clone -U . ../empty
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc)
- linking [ <=> ] 2\r (no-eol) (esc)
- linking [ <=> ] 3\r (no-eol) (esc)
- linking [ <=> ] 4\r (no-eol) (esc)
- linking [ <=> ] 5\r (no-eol) (esc)
- linking [ <=> ] 6\r (no-eol) (esc)
- linking [ <=> ] 7\r (no-eol) (esc)
- linking [ <=> ] 8\r (no-eol) (esc)
- linking [ <=> ] 9\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 10\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 11\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 12\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 13\r (no-eol) (esc) (reposimplestore !)
+ linking [====> ] 1/9\r (no-eol) (esc)
+ linking [=========> ] 2/9\r (no-eol) (esc)
+ linking [==============> ] 3/9\r (no-eol) (esc)
+ linking [===================> ] 4/9\r (no-eol) (esc)
+ linking [========================> ] 5/9\r (no-eol) (esc)
+ linking [=============================> ] 6/9\r (no-eol) (esc)
+ linking [==================================> ] 7/9\r (no-eol) (esc)
+ linking [=======================================> ] 8/9\r (no-eol) (esc)
+ linking [============================================>] 9/9\r (no-eol) (esc)
\r (no-eol) (esc)
#else
$ hg clone -U . ../empty
@@ -484,22 +480,14 @@
archiving [==========================================>] 3/3\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc)
- linking [ <=> ] 2\r (no-eol) (esc)
- linking [ <=> ] 3\r (no-eol) (esc)
- linking [ <=> ] 4\r (no-eol) (esc)
- linking [ <=> ] 5\r (no-eol) (esc)
- linking [ <=> ] 6\r (no-eol) (esc)
- linking [ <=> ] 7\r (no-eol) (esc)
- linking [ <=> ] 8\r (no-eol) (esc)
- linking [ <=> ] 9\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 10\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 11\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 12\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 13\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 14\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 15\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 16\r (no-eol) (esc) (reposimplestore !)
+ linking [====> ] 1/8\r (no-eol) (esc)
+ linking [==========> ] 2/8\r (no-eol) (esc)
+ linking [===============> ] 3/8\r (no-eol) (esc)
+ linking [=====================> ] 4/8\r (no-eol) (esc)
+ linking [===========================> ] 5/8\r (no-eol) (esc)
+ linking [================================> ] 6/8\r (no-eol) (esc)
+ linking [======================================> ] 7/8\r (no-eol) (esc)
+ linking [============================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
archiving (foo) [ ] 0/3\r (no-eol) (esc)
@@ -508,15 +496,12 @@
archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc)
- linking [ <=> ] 2\r (no-eol) (esc)
- linking [ <=> ] 3\r (no-eol) (esc)
- linking [ <=> ] 4\r (no-eol) (esc)
- linking [ <=> ] 5\r (no-eol) (esc)
- linking [ <=> ] 6\r (no-eol) (esc)
- linking [ <=> ] 7\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 8\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 9\r (no-eol) (esc) (reposimplestore !)
+ linking [======> ] 1/6\r (no-eol) (esc)
+ linking [==============> ] 2/6\r (no-eol) (esc)
+ linking [=====================> ] 3/6\r (no-eol) (esc)
+ linking [=============================> ] 4/6\r (no-eol) (esc)
+ linking [====================================> ] 5/6\r (no-eol) (esc)
+ linking [============================================>] 6/6\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
archiving (foo/bar) [ ] 0/1\r (no-eol) (esc)
diff --git a/tests/test-subrepo-deep-nested-change.t b/tests/test-subrepo-deep-nested-change.t
--- a/tests/test-subrepo-deep-nested-change.t
+++ b/tests/test-subrepo-deep-nested-change.t
@@ -28,12 +28,12 @@
$ echo "sub2 = ../sub2" > sub1/.hgsub
$ hg clone sub2 sub1/sub2
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc)
- linking [ <=> ] 2\r (no-eol) (esc)
- linking [ <=> ] 3\r (no-eol) (esc)
- linking [ <=> ] 4\r (no-eol) (esc)
- linking [ <=> ] 5\r (no-eol) (esc)
- linking [ <=> ] 6\r (no-eol) (esc)
+ linking [======> ] 1/6\r (no-eol) (esc)
+ linking [==============> ] 2/6\r (no-eol) (esc)
+ linking [=====================> ] 3/6\r (no-eol) (esc)
+ linking [=============================> ] 4/6\r (no-eol) (esc)
+ linking [====================================> ] 5/6\r (no-eol) (esc)
+ linking [============================================>] 6/6\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
@@ -52,27 +52,25 @@
$ echo "sub1 = ../sub1" > main/.hgsub
$ hg clone sub1 main/sub1
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc)
- linking [ <=> ] 2\r (no-eol) (esc)
- linking [ <=> ] 3\r (no-eol) (esc)
- linking [ <=> ] 4\r (no-eol) (esc)
- linking [ <=> ] 5\r (no-eol) (esc)
- linking [ <=> ] 6\r (no-eol) (esc)
- linking [ <=> ] 7\r (no-eol) (esc)
- linking [ <=> ] 8\r (no-eol) (esc)
- linking [ <=> ] 9\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 10\r (no-eol) (esc) (reposimplestore !)
+ linking [====> ] 1/8\r (no-eol) (esc)
+ linking [==========> ] 2/8\r (no-eol) (esc)
+ linking [===============> ] 3/8\r (no-eol) (esc)
+ linking [=====================> ] 4/8\r (no-eol) (esc)
+ linking [===========================> ] 5/8\r (no-eol) (esc)
+ linking [================================> ] 6/8\r (no-eol) (esc)
+ linking [======================================> ] 7/8\r (no-eol) (esc)
+ linking [============================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
updating [===========================================>] 3/3\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc)
- linking [ <=> ] 2\r (no-eol) (esc)
- linking [ <=> ] 3\r (no-eol) (esc)
- linking [ <=> ] 4\r (no-eol) (esc)
- linking [ <=> ] 5\r (no-eol) (esc)
- linking [ <=> ] 6\r (no-eol) (esc)
+ linking [======> ] 1/6\r (no-eol) (esc)
+ linking [==============> ] 2/6\r (no-eol) (esc)
+ linking [=====================> ] 3/6\r (no-eol) (esc)
+ linking [=============================> ] 4/6\r (no-eol) (esc)
+ linking [====================================> ] 5/6\r (no-eol) (esc)
+ linking [============================================>] 6/6\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
updating to branch default
@@ -156,46 +154,36 @@
$ hg --config extensions.largefiles= clone main cloned
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc)
- linking [ <=> ] 2\r (no-eol) (esc)
- linking [ <=> ] 3\r (no-eol) (esc)
- linking [ <=> ] 4\r (no-eol) (esc)
- linking [ <=> ] 5\r (no-eol) (esc)
- linking [ <=> ] 6\r (no-eol) (esc)
- linking [ <=> ] 7\r (no-eol) (esc)
- linking [ <=> ] 8\r (no-eol) (esc)
- linking [ <=> ] 9\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 10\r (no-eol) (esc) (reposimplestore !)
+ linking [====> ] 1/8\r (no-eol) (esc)
+ linking [==========> ] 2/8\r (no-eol) (esc)
+ linking [===============> ] 3/8\r (no-eol) (esc)
+ linking [=====================> ] 4/8\r (no-eol) (esc)
+ linking [===========================> ] 5/8\r (no-eol) (esc)
+ linking [================================> ] 6/8\r (no-eol) (esc)
+ linking [======================================> ] 7/8\r (no-eol) (esc)
+ linking [============================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
updating [===========================================>] 3/3\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc)
- linking [ <=> ] 2\r (no-eol) (esc)
- linking [ <=> ] 3\r (no-eol) (esc)
- linking [ <=> ] 4\r (no-eol) (esc)
- linking [ <=> ] 5\r (no-eol) (esc)
- linking [ <=> ] 6\r (no-eol) (esc)
- linking [ <=> ] 7\r (no-eol) (esc)
- linking [ <=> ] 8\r (no-eol) (esc)
- linking [ <=> ] 9\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 10\r (no-eol) (esc) (reposimplestore !)
+ linking [====> ] 1/8\r (no-eol) (esc)
+ linking [==========> ] 2/8\r (no-eol) (esc)
+ linking [===============> ] 3/8\r (no-eol) (esc)
+ linking [=====================> ] 4/8\r (no-eol) (esc)
+ linking [===========================> ] 5/8\r (no-eol) (esc)
+ linking [================================> ] 6/8\r (no-eol) (esc)
+ linking [======================================> ] 7/8\r (no-eol) (esc)
+ linking [============================================>] 8/8\r (no-eol) (esc)
updating [===========================================>] 3/3\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
- linking [ <=> ] 1\r (no-eol) (esc) (reporevlogstore !)
- linking [ <=> ] 2\r (no-eol) (esc) (reporevlogstore !)
- linking [ <=> ] 3\r (no-eol) (esc) (reporevlogstore !)
- linking [ <=> ] 4\r (no-eol) (esc) (reporevlogstore !)
- linking [ <=> ] 5\r (no-eol) (esc) (reporevlogstore !)
- linking [ <=> ] 6\r (no-eol) (esc) (reporevlogstore !)
- linking [ <=> ] 1\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 2\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 3\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 4\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 5\r (no-eol) (esc) (reposimplestore !)
- linking [ <=> ] 6\r (no-eol) (esc) (reposimplestore !)
+ linking [======> ] 1/6\r (no-eol) (esc)
+ linking [==============> ] 2/6\r (no-eol) (esc)
+ linking [=====================> ] 3/6\r (no-eol) (esc)
+ linking [=============================> ] 4/6\r (no-eol) (esc)
+ linking [====================================> ] 5/6\r (no-eol) (esc)
+ linking [============================================>] 6/6\r (no-eol) (esc)
updating [===========================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
updating to branch default
diff --git a/tests/test-hardlinks.t b/tests/test-hardlinks.t
--- a/tests/test-hardlinks.t
+++ b/tests/test-hardlinks.t
@@ -61,13 +61,13 @@
Create hardlinked clone r2:
$ hg clone -U --debug r1 r2 --config progress.debug=true
- linking: 1 files
- linking: 2 files
- linking: 3 files
- linking: 4 files
- linking: 5 files
- linking: 6 files
- linking: 7 files
+ linking: 1/7 files (14.29%)
+ linking: 2/7 files (28.57%)
+ linking: 3/7 files (42.86%)
+ linking: 4/7 files (57.14%)
+ linking: 5/7 files (71.43%)
+ linking: 6/7 files (85.71%)
+ linking: 7/7 files (100.00%)
linked 7 files
updating the branch cache
@@ -91,7 +91,7 @@
2 r1/.hg/store/00manifest.i
2 r1/.hg/store/data/d1/f2.i
2 r1/.hg/store/data/f1.i
- 2 r1/.hg/store/fncache (repofncache !)
+ 1 r1/.hg/store/fncache (repofncache !)
1 r1/.hg/store/phaseroots
1 r1/.hg/store/undo
1 r1/.hg/store/undo.backup.fncache (repofncache !)
@@ -103,7 +103,7 @@
2 r2/.hg/store/00manifest.i
2 r2/.hg/store/data/d1/f2.i
2 r2/.hg/store/data/f1.i
- 2 r2/.hg/store/fncache (repofncache !)
+ 1 r2/.hg/store/fncache (repofncache !)
Repo r3 should not be hardlinked:
@@ -175,7 +175,7 @@
#if hardlink-whitelisted repofncache
$ nlinksdir r2/.hg/store/fncache
- 2 r2/.hg/store/fncache
+ 1 r2/.hg/store/fncache
#endif
$ hg -R r2 verify
@@ -201,11 +201,11 @@
1 r2/.hg/store/00manifest.i
1 r2/.hg/store/data/d1/f2.i
1 r2/.hg/store/data/f1.i
- [12] r2/\.hg/store/fncache (re) (repofncache !)
+ 1 r2/.hg/store/fncache (repofncache !)
#if hardlink-whitelisted repofncache
$ nlinksdir r2/.hg/store/fncache
- 2 r2/.hg/store/fncache
+ 1 r2/.hg/store/fncache
#endif
Create a file which exec permissions we will change
diff --git a/tests/test-fncache.t b/tests/test-fncache.t
--- a/tests/test-fncache.t
+++ b/tests/test-fncache.t
@@ -528,7 +528,11 @@
Unbundling should follow the same rules; existing files should not cause a load:
+(loading during the clone is expected)
$ hg clone -q . tobundle
+ fncache load triggered!
+ fncache load triggered!
+
$ echo 'new line' > tobundle/bar
$ hg -R tobundle ci -qm bar
$ hg -R tobundle bundle -q barupdated.hg
diff --git a/tests/test-empty.t b/tests/test-empty.t
--- a/tests/test-empty.t
+++ b/tests/test-empty.t
@@ -45,6 +45,7 @@
$ ls .hg
00changelog.i
cache
+ dirstate
hgrc
requires
store
diff --git a/tests/test-clone.t b/tests/test-clone.t
--- a/tests/test-clone.t
+++ b/tests/test-clone.t
@@ -86,26 +86,22 @@
#if hardlink
$ hg --debug clone -U . ../c --config progress.debug=true
- linking: 1 files
- linking: 2 files
- linking: 3 files
- linking: 4 files
- linking: 5 files
- linking: 6 files
- linking: 7 files
- linking: 8 files
- linked 8 files (reporevlogstore !)
- linking: 9 files (reposimplestore !)
- linking: 10 files (reposimplestore !)
- linking: 11 files (reposimplestore !)
- linking: 12 files (reposimplestore !)
- linking: 13 files (reposimplestore !)
- linking: 14 files (reposimplestore !)
- linking: 15 files (reposimplestore !)
- linking: 16 files (reposimplestore !)
- linking: 17 files (reposimplestore !)
- linking: 18 files (reposimplestore !)
- linked 18 files (reposimplestore !)
+ linking: 1/15 files (6.67%)
+ linking: 2/15 files (13.33%)
+ linking: 3/15 files (20.00%)
+ linking: 4/15 files (26.67%)
+ linking: 5/15 files (33.33%)
+ linking: 6/15 files (40.00%)
+ linking: 7/15 files (46.67%)
+ linking: 8/15 files (53.33%)
+ linking: 9/15 files (60.00%)
+ linking: 10/15 files (66.67%)
+ linking: 11/15 files (73.33%)
+ linking: 12/15 files (80.00%)
+ linking: 13/15 files (86.67%)
+ linking: 14/15 files (93.33%)
+ linking: 15/15 files (100.00%)
+ linked 15 files
updating the branch cache
#else
$ hg --debug clone -U . ../c --config progress.debug=true
@@ -117,18 +113,6 @@
copying: 6 files
copying: 7 files
copying: 8 files
- copied 8 files (reporevlogstore !)
- copying: 9 files (reposimplestore !)
- copying: 10 files (reposimplestore !)
- copying: 11 files (reposimplestore !)
- copying: 12 files (reposimplestore !)
- copying: 13 files (reposimplestore !)
- copying: 14 files (reposimplestore !)
- copying: 15 files (reposimplestore !)
- copying: 16 files (reposimplestore !)
- copying: 17 files (reposimplestore !)
- copying: 18 files (reposimplestore !)
- copied 18 files (reposimplestore !)
#endif
$ cd ../c
diff --git a/mercurial/streamclone.py b/mercurial/streamclone.py
--- a/mercurial/streamclone.py
+++ b/mercurial/streamclone.py
@@ -8,6 +8,7 @@
from __future__ import absolute_import
import contextlib
+import errno
import os
import struct
@@ -15,6 +16,7 @@
from .pycompat import open
from .interfaces import repository
from . import (
+ bookmarks,
cacheutil,
error,
narrowspec,
@@ -25,6 +27,9 @@
store,
util,
)
+from .utils import (
+ stringutil,
+)
def canperformstreamclone(pullop, bundle2=False):
@@ -771,3 +776,104 @@
repo.ui, repo.requirements, repo.features
)
scmutil.writereporequirements(repo)
+
+
+def _copy_files(src_vfs_map, dst_vfs_map, entries, progress):
+ hardlink = [True]
+
+ def copy_used():
+ hardlink[0] = False
+ progress.topic = _(b'copying')
+
+ for k, path, size in entries:
+ src_vfs = src_vfs_map[k]
+ dst_vfs = dst_vfs_map[k]
+ src_path = src_vfs.join(path)
+ dst_path = dst_vfs.join(path)
+ dirname = dst_vfs.dirname(path)
+ if not dst_vfs.exists(dirname):
+ dst_vfs.makedirs(dirname)
+ dst_vfs.register_file(path)
+ # XXX we could use the #nb_bytes argument.
+ util.copyfile(
+ src_path,
+ dst_path,
+ hardlink=hardlink[0],
+ no_hardlink_cb=copy_used,
+ check_fs_hardlink=False,
+ )
+ progress.increment()
+ return hardlink[0]
+
+
+def local_copy(src_repo, dest_repo):
+ """copy all content from one local repository to another
+
+ This is useful for local clone"""
+ src_store_requirements = {
+ r
+ for r in src_repo.requirements
+ if r not in requirementsmod.WORKING_DIR_REQUIREMENTS
+ }
+ dest_store_requirements = {
+ r
+ for r in dest_repo.requirements
+ if r not in requirementsmod.WORKING_DIR_REQUIREMENTS
+ }
+ assert src_store_requirements == dest_store_requirements
+
+ with dest_repo.lock():
+ with src_repo.lock():
+ entries, totalfilesize = _v2_walk(
+ src_repo,
+ includes=None,
+ excludes=None,
+ includeobsmarkers=True,
+ )
+ src_vfs_map = _makemap(src_repo)
+ dest_vfs_map = _makemap(dest_repo)
+ progress = src_repo.ui.makeprogress(
+ topic=_(b'linking'),
+ total=len(entries),
+ unit=_(b'files'),
+ )
+ # copy files
+ #
+ # We could copy the full file while the source repository is locked
+ # and the other one without the lock. However, in the linking case,
+ # this would also requires checks that nobody is happening any data
+ # to the files while we do the clone, so this is not done yet. We
+ # could do this blindly when copying files.
+ files = ((k, path, size) for k, path, ftype, size in entries)
+ hardlink = _copy_files(src_vfs_map, dest_vfs_map, files, progress)
+
+ # copy bookmarks over
+ src_book_vfs = bookmarks.bookmarksvfs(src_repo)
+ srcbookmarks = src_book_vfs.join(b'bookmarks')
+ dst_book_vfs = bookmarks.bookmarksvfs(dest_repo)
+ dstbookmarks = dst_book_vfs.join(b'bookmarks')
+ if os.path.exists(srcbookmarks):
+ util.copyfile(srcbookmarks, dstbookmarks)
+ progress.complete()
+ if hardlink:
+ msg = b'linked %d files\n'
+ else:
+ msg = b'copied %d files\n'
+ src_repo.ui.debug(msg % len(entries))
+
+ with dest_repo.transaction(b"localclone") as tr:
+ dest_repo.store.write(tr)
+
+ # clean up transaction file as they do not make sense
+ undo_files = [(dest_repo.svfs, b'undo.backupfiles')]
+ undo_files.extend(dest_repo.undofiles())
+ for undovfs, undofile in undo_files:
+ try:
+ undovfs.unlink(undofile)
+ except OSError as e:
+ if e.errno != errno.ENOENT:
+ msg = _(b'error removing %s: %s\n')
+ path = undovfs.join(undofile)
+ e_msg = stringutil.forcebytestr(e)
+ msg %= (path, e_msg)
+ dest_repo.ui.warn(msg)
diff --git a/mercurial/hg.py b/mercurial/hg.py
--- a/mercurial/hg.py
+++ b/mercurial/hg.py
@@ -24,7 +24,6 @@
from . import (
bookmarks,
bundlerepo,
- cacheutil,
cmdutil,
destutil,
discovery,
@@ -866,18 +865,10 @@
requirements=dest_reqs,
)
destrepo = localrepo.makelocalrepository(ui, destrootpath)
+ destlock = destrepo.lock()
+ from . import streamclone # avoid cycle
- destpath = destrepo.vfs.base
- destlock = copystore(ui, srcrepo, destpath)
- # copy bookmarks over
- srcbookmarks = srcrepo.vfs.join(b'bookmarks')
- dstbookmarks = os.path.join(destpath, b'bookmarks')
- if os.path.exists(srcbookmarks):
- util.copyfile(srcbookmarks, dstbookmarks)
-
- dstcachedir = os.path.join(destpath, b'cache')
- for cache in cacheutil.cachetocopy(srcrepo):
- _copycache(srcrepo, dstcachedir, cache)
+ streamclone.local_copy(srcrepo, destrepo)
# we need to re-init the repo after manually copying the data
# into it
To: marmoute, #hg-reviewers
Cc: mercurial-patches, mercurial-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mercurial-scm.org/pipermail/mercurial-patches/attachments/20210609/8e9de61b/attachment-0001.html>
More information about the Mercurial-patches
mailing list